The Motorola XPR 6380 portable two-way radio has been discontinued. Many parts and accessories are still available for this radio. Please contact us to check on their availability and other compatible radio models to suit your needs.
Antennas
 | NAF5087 Whip Antenna 800 MHz 1/2 Wave ‐ Intrinsically Safe (FM) |
 | NAF5088 Whip Antenna 900 MHz 1/2 Wave ‐ Intrinsically Safe (FM) |
 | PMAF4003 800/900 MHz & GPS Helical Antenna (806‐941 MHz) ‐ Intrinsically Safe (FM) |
Batteries
 | PMNN4065 NiMH, 1300 mAh, 7.2V Submersible (IP57) Battery |
 | PMNN4066 IMPRES Li-ion 1500 mAh Submersible (IP57) Battery. Original PMNN4066A IMPRES Li-ion 1500 mAh Submersible (IP57) Battery. The IP57 is a higher rating than the standard IP54 that helps provide first responders with high reliability in emergency situations. The number "5" stands for the dust intrusion rating, or the capcaity to withstand the effects of fine, abrasive dust particles. The "7" means a higher water intrusion rating. |
 | PMNN4069 IMPRES Li-ion, 1400 mAh, 7.2V Submersible (IP57) Battery - Intrinsically Safe (FM) |
 | PMNN4077 IMPRES Li-ion, 2200 mAh, 7.2V Submersible (IP57) Battery |
| PMNN4262 IMPRES Li‐ion, 2850T IP57 Battery |
Carry Accessories
 | 1505596Z02 Replacement Strap for RLN4570 and HLN6602 Chest Packs |
 | 4200865599 1.75” Wide Leather Belt |
 | 4280384F89 RadioPAk Extension Belt. For waists larger than 40 inches. RadioPAk Extension Belt. For waists larger than 40 inches. |
 | HLN6602 Universal Chest Pack with Radio Holder, Pen Holder and Velcro Secured Pouch Motorola Original Universal Chest Pack protects the radio and provides the freedom from holding it during standby communication mode. Universal Chest Pack fits virtually any radio. |
 | HLN9985 Waterproof Bag with Large Strap |
 | NTN5243 Adjustable, Black Nylon Carrying Strap Attaches to D-ring on cases. |
 | PMLN4651 2" Hard Plastic Belt Clip |
 | PMLN4652 2.5" Belt Clip |
 | PMLN5022 2.5" Replacement Swivel Belt Loop |
 | PMLN5023 3" Replacement Swivel Belt Loop |
 | PMLN5024 Nylon Carry Case with 3" Fixed Belt Loop for Non-Display Radio |
| PMLN5028 Hard Leather Carry Case with 2.5" Swivel Belt Loop for Non-Display Radio |
 | PMLN5029 Hard Leather Carry Case with 3" Swivel Belt Loop for Non-Display Radio |
 | PMLN5030 Hard Leather Carry Case with 3" Fixed Belt Loop for Non-Display Radio |
 | RLN4570 Break-Away Chest Pack All the features of the original Universal Chest Pack (HLN6602A) plus break-a-way tabs that allow the entire pack to be pulled off with approximately 10 lbs. of pressure. |
 | RLN4815 RadioPAk Radio/Utility Case The RadioPAk is lightweight and comfortable. Worn around the waist, it keeps radios/phones at hand. It features a separate 6 x 8 inch zippered pouch for other on-the-job necessities. Adjustable woven nylon belt fits both men and women. |
Chargers
 | NLN7967 Wall Mount for Multi-Unit Charger This is a wall mount for IMPRES™ multi-unit charges. IMPRES battery chargers ensure maximum talk time and optimized battery cycle life through the use of its advanced charging algorithm and automatic reconditioning features |
 | NNTN7392 IMPRES Battery Reader The industry exclusive IMPRES Battery Reader provides IMPRES battery users the ability to access charging, reconditioning and key usage data that can affect overall battery performance. By keeping batteries in peak condition, talk time and cycle life are optimized, reducing battery replacement. Package includes IMPRES Battery Reader, system software, USB cord and adapter inserts for APX Series radios. |
 | NNTN7616 IMPRESS Vehicular Charger The IMPRES vehicular charger has full IMPRES charger to battery communication capability. This ensures continuity of IMPRES battery charge data logging in a vehicular environment, so the IMPRES battery will receive timely adaptive, automatic reconditioning and will qualify for the 6-month capacity warranty extension. |
 | NNTN7677 Multi-Unit Charger Interface Unit Multi-Unit Charger Interface Unit, attaches to an APX, XTS, MOTOTRBO and Professional Series IMPRES multi-unit charger to enable the data transfer to IMPRES Battery Fleet Management. A CIU is required for IMPRES chargers that report data to IMPRES Battery Fleet Management. |
 | NNTN8045 Single-Unit Charger Interface Unit Single-Unit Charger Interface Unit, attaches to an APX IMPRES single-unit charger to enable the data transfer to IMPRES Battery Fleet Management. A CIU is required for IMPRES chargers that report data to the IMPRES Battery Fleet Management. |
 | NNTN8525 MOTOTRBO Travel Charger |
 | RLN5382 Charger Display Module for IMPRES Multi-Unit Charger with Software This module is compatible with the standard IMPRES Multi-Unit Charger WPLN4108BR, WPLN4109BR and WPLN4110BR. Up to 6 modules can be used per charger, one for each charging pocket. Includes detailed installation instructions. |
| RLN6433 Travel Charger Travel Charger (includes voltage regulated lighter adapter, custom charger base, coil cord and mounting bracket) |
 | WPLN4232 IMPRES Single Unit Charger Ensures maximum talk time and optimized battery cycle life. Automatically reconditions IMPRES batteries based on actual usage, keeping them in peak condition. |
 | PMPN4284 IMPRES 6 pocket, 1 display charger |
Earpieces
 | 5080384F72 Replacement Foam Plugs. Noise reduction = 24dB. Pack of 50. For RLN6230A and RLN6231A. |
 | AARLN4885 Receive-Only Covered Earbud with coiled cord This earpiece is compatible with all Remote Speaker Microphones with a 3.5 mm audio jack on the head of the microphone. |
 | NTN2570 Mission Critical Wireless Earpiece with 12" cable and push to talk pod. Earpiece with 12" cable and push to talk pod. (For Enhanced Operations Critical Wireless with Touch Pairing) This earpiece is designed specifically for first responders. Seamless, streamlined and encrypted with strong 128 bit keys. This lightweight earpiece can be worn comfortably for long shifts common in public safety and performs well in loud environments. |
 | NNTN8125 Wireless Accessory Kit, Standard Pair, 12in Cable Wireless Accessory Kit, Standard Pair, 12in Cable (Not compatible with SMARTNET/ Privacy Plus, Connect Plus, or LTR/PassPort modes of operation) |
 | NNTN8126 Wireless Accessory Kit, Standard Pair, 9.5in Cable Wireless Accessory Kit, Standard Pair, 9.5in Cable (Not compatible with SMARTNET/ Privacy Plus, Connect Plus, or LTR/PassPort modes of operation) |
 | NNTN8127 Wireless Accessory Kit, Standard Pair Wireless Accessory Kit, Standard Pair (Not compatible with SMARTNET/ Privacy Plus, Connect Plus, or LTR/PassPort modes of operation) |
 | NNTN8294 Earbud single with 11.4" cable, inline mic, BLACK Earbud single with 11.4" cable, inline mic, BLACK |
 | NNTN8295 Earbud single with 45.7" cable, inline mic, BLACK Earbud single with 45.7" cable, inline mic, BLACK |
 | NNTN8299 Replacement Eartips |
| NNTN8361 Eartips, Bulk Replacement Eartips, Bulk Replacement |
 | PMLN4620 Receive-Only D-Shell Earpiece This earpiece is compatible with all Remote Speaker Microphones with a 3.5 mm audio jack on the head of the microphone. |
| PMLN5097 IMPRES 3 Wire Surveillance Kit, Black - Intrinsically Safe (FM) |
| PMLN5106 IMPRES 3 Wire Surveillance Kit, Beige - Intrinsically Safe (FM) |
 | PMLN5712 Operation Critical Wireless Adapter Operation Critical Wireless Adapter (designed for radio software version R01.07.00 or later) Please consider battery selection when using BT devices. The additional current drawn will impact battery run time. (Not compatible with SMARTNET/Privacy Plus, Connect Plus, or LTR/PassPort modes of operation) |
 | PMLN5993 TRBO Wireless Adapter TRBO Wireless Adapter FM Touch Pairing Compatible with Mission Critical Wireless kits (Not compatible w/SMARTNET/Privacy Plus, Connect Plus, or LTR/PassPort modes of operation) |
 | PMLN6095 Audio Adapter, In‐Line PTT Adapter, GCAI |
 | PMLN6123 IMPRES 3 Wire Surveillance Kit, with Translucent Tube, Black ‐ FM / UL Approved |
 | PMLN6124 IMPRES 3 Wire Surveillance Kit, with Translucent Tube, Beige ‐ FM / UL Approved |
 | PMLN6125 Receive Only Surveillance Kit, Black (single wire) ‐ FM / UL Approved |
 | PMLN6126 Receive Only Surveillance Kit, Beige (single wire) ‐ FM / UL Approved |
 | PMLN6127 IMPRES 2 Wire Surveillance Kit, Black ‐ FM / UL Approved |
 | PMLN6128 IMPRES 2 Wire Surveillance Kit, Beige ‐ FM / UL Approved |
 | PMLN6129 IMPRES 2 Wire Surveillance Kit w/ Translucent tube ‐ Black ‐ FM / UL Approved |
 | PMLN6130 IMPRES 2 Wire Surveillance Kit w/ Translucent tube ‐ Beige ‐ FM / UL Approved |
 | PMLN7052 1‐Wire Surveillance Kit for OCW/MCW |
 | Clear Comfortable Earpiece
The Clear Comfortable Earpiece forms to the inside of the ear and is perfect for low noise environments. It's made of easy-to-clean, chemically-inert hypo-allergenic material. |
 | RLN4941 Receive-Only Earpiece with Translucent Tube and Rubber Eartip An earphone jack located on the microphone allows the user to receive audio when using this earpiece. The translucent tube provides a more discreet option for those that need to receive messages privately |
 | RLN5879 Receive Only Surveillance Kit, Beige (single-wire) - Intrinsically Safe (FM) |
 | RLN5886 Surveillance Low Noise Kit Surveillance Low Noise Kit, includes 1 clear rubber eartip. For low-noise environments (does not provide hearing protection) |
 | RLN5887 Surveillance Extreme Noise Kit Surveillance Extreme Noise Kit, includes 2 foam earplugs. For high-noise environments (Noise Reduction = 24dB) |
| RLN6279 Replacement Standard Earpiece - Black |
 | RLN6280 Replacement Standard Earpiece - Biege |
 | RLN6282 Replacement Ear Tips, Clear - Pack of 50 Replacement Ear Tips, Clear - Pack of 50 (for use with RLN5886) |
| RLN6284 Replacement Earpiece with Low Noise Kit Attached - Beige |
| RLN6288 Replacement Earpiece with High Noise Kit Attached - Beige |
| RLN6289 Replacement Earpiece with High Noise Kit Attached - Black |
 | RLN6500 Bluetooth Accessory Kit with NA Power Supply |
 | RLN6550 Wireless Earpiece, Bluetooth Accessory Kit Multi (Pack of 3 PMLN6397) |
 | RLN6511 EP7 Sonic Defender, use with RLN4941 |
 | WADN4190 Receive-Only Flexible Earpiece with 3.5mm plug This earpiece is compatible with all Remote Speaker Microphones with a 3.5 mm audio jack on the head of the microphone. |
Headsets
 | PMLN5096 D-Style Earset - Intrinsically Safe (FM) |
 | PMLN5101 IMPRES Temple Transducer - Intrinsically Safe (FM) IMPRES Temple Transducer with boom microphone and in-line push-to-talk button. |
 | PMLN5102 Ultra Lightweight Headset - Intrinsically Safe (FM) |
 | PMLN5275 Heavy Duty Headset, Noise Reduction = 24dB Designed for rugged use in noisy environments where hearing protection is required. This dual-muff headset includes flexible noisecanceling boom microphone with a push-to-talk switch located on the earcup. This can be worn with or without a helmet. |
| RLN6283 Replacement Foam Earpad and Windscreen |
 | RLN6490 XBT Headset BTN, Heavy Duty Headset , BT |
| RLN6491 XBT HeadsetHB, Heavy Duty Headset , BT |
 | RMN5058 Lightweight Headset, over-the-head, single-muff with in-line push-to-talk Provides high-clarity, hands-free discreet two-way communication, while maintaining the comfort necessary for extended wear in moderate noise environments. This single-muff adjustable headset comes with rotating boom microphone for left or right positioning. Includes an in-line push-to-talk button. |
 | RMN5137 3M Peltor MT Series 2‐Way Comm Headset, MT7H79A Headband |
 | RMN5138 3M Peltor MT Series 2‐Way Comm Headset, MT7H79B Neckband |
 | RMN5139 3M Peltor MT Series 2‐Way Comm Headset, MT7H79P3E ‐ Hard Hat Attachment |
Remote Speaker Mics
 | NNTN8382 IMPRES Industrial Noise Cancelling Microphone Submersible (IP57) |
 | NNTN8383 IMPRES Industrial Noise Cancelling Microphone with threaded 3.5mm audio jack ‐ UL Approved |
 | PMMN4024 Remote Speaker Microphone This Remote Speaker Microphones utilize advanced windporting technology that can help reduce background noise in windy conditions. The PMMN4024A has an earjack located on the microphone head to eliminate long wires. |
 | PMMN4025 IMPRES Remote Speaker Microphone with 3.5mm audio jack - Intrinsically Safe (FM) |
 | PMMN4040 Remote Speaker Microphone - Submersible (IP57) - Intrinsically Safe (FM) |
 | PMMN4041 IMPRES Public Safety Microphone, 30" Cable IMPRES Public Safety Microphone, 30" Cable (antenna sold separately - PMAE4046, PMAE4047, PMAD4087, PMAD4086. Listed within Antenna Section) - Intrinsically Safe (FM) |
 | PMMN4042 IMPRES Public Safety Microphone, 24" Cable IMPRES Public Safety Microphone, 24" Cable (antenna sold separately - PMAE4046, PMAE4047, PMAD4087, PMAD4086. Listed within Antenna Section) - Intrinsically Safe (FM) |
 | PMMN4043 IMPRES Public Safety Microphone, 18" Cable - Intrinsically Safe (FM) IMPRES Public Safety Microphone, 18" Cable (antenna sold separately - PMAE4046, PMAE4047, PMAD4087, PMAD4086. Listed within Antenna Section) - Intrinsically Safe (FM) |
 | PMMN4046 IMPRES Remote Speaker Microphone with Volume - Submersible (IP57) - Intrinsically Safe (FM) IMPRES Remote Speaker Microphone with Volume - Submersible (IP57) - Intrinsically Safe (FM) |
 | PMMN4047 IMPRES Public Safety Microphone, 30" Cable - Submersible (IP57) IMPRES Public Safety Microphone, 30" Cable - Submersible (IP57) (antenna sold separately - PMAE4046, PMAE4047, PMAD4087, PMAD4086 - Listed within Antenna section) - Intrinsically Safe (FM) |
 | PMMN4048 IMPRES Public Safety Microphone, 24" Cable - Submersible (IP57) IMPRES Public Safety Microphone, 24" Cable - Submersible (IP57) (antenna sold separately - PMAE4046, PMAE4047, PMAD4087, PMAD4086 - Listed within Antenna section) - Intrinsically Safe (FM) |
 | PMMN4049 IMPRES Public Safety Microphone, 18" Cable - Submersible (IP57) IMPRES Public Safety Microphone, 18" Cable - Submersible (IP57) (antenna sold separately - PMAE4046, PMAE4047, PMAD4087, PMAD4086 - Listed within Antenna section) - Intrinsically Safe (FM) |
 | PMMN4050 IMPRES Remote Speaker Microphone with 3.5mm Earjack, Noise Canceling - Intrinsically Safe (FM) IMPRES Remote Speaker Microphone with 3.5mm Earjack, Noise Canceling - Intrinsically Safe (FM) |
 | RLN6074 Remote Speaker Microphone Replacement Coil Cord Kit Remote Speaker Microphone Replacement Coil Cord Kit (for PMMN4024 and PMMN4040) |
 | RLN6075 Remote Speaker Microphone Replacement Coil Cord Kit (for PMMN4025, PMMN4046, and PMMN4050 |
